Comparison of the Best EDC Folding Knife
Kershaw Brawler 1990 Speedsafe Folding Knife
Al Mar Mini Sere 2000
Cold Steel Code 4 Tanto Blade Folding Knife
Blade Requirements for the Best EDC Folding Knife
The business end of your knife is the most important aspect of a good EDC knife, so we want to make sure you have a few points of reference before you make a buying decision. First of all, the tip of the blade, is it a tanto or drop point, is it the correct length, and is the blade made from quality materials?
Tanto or Drop Point Blade?
Tanto- Is known for being an excellent puncture/chopping knife, because these blades were originally made in Japan from broken swords. This type of blade is thicker throughout the body, and at the end comes to a very sharp and pointed tip. Unfortunately there aren't many tanto blades that are foldable, making it a rare find for an EDC.
Drop point- This blade is more of what you would find on a traditional kitchen knife. It has a rounded body and thins out towards the tip. Better for making precise cuts and carving.
Best Blade Length For an EDC Knife
A rule of thumb that's been passed down to most owners of great pocket knives, is that you want one that is the length of your palm when folded.
After all, this will be in your pocket all the time, so you want something that will be large enough to be effective, but not something that impedes your everyday life. If you have to put a number to it, it's best to go with a 3-4 inch blade for an EDC knife.
Best Materials For an EDC Knife Blade
When judging the quality of your knife's blade, you're looking for two things, composition and hardness.
The chemical composition of the knife isn't that important because most of us don't know the base chemical compounds well enough to hold more than a two sentence conversation! All you need to know is that high carbon content knives hold an edge considerably well, but it's drawback is that it's much more susceptible to corrosion.
As for the hardness of the blade materials, there's a test called the Rockwell Hardness Code which tests the blade's toughness with machines and tactics that normal folks don't have access to. What you need to look for is the Rockwell numbers which are from 55-60. The higher the number the harder the blade, the lower number the softer the blade. But soft means it can be sharpened easily and harder means the blade is more brittle.
Do You Need an Assisted or Spring Open Blade?
Just to be clear from the begining, an assisted blade is not a switch blade. A switch blade requires you only push a button to deploy the blade, where-as an assisted blade makes you open the blade partially before the spring catches and does the rest.
The usefulness of an assisted blade is through the roof, so of course it's recommended that you go for an assisted blade over a manual one. If only for the fact that it could be deployed in a fraction of the time. It's true that there are ways to open a manual knife just as fast with the flick of the wrist. But what if that range of motion is granted in a situation? Better safe than sorry.
Grip Material Matters
Bottom line with your EDC knife handle is that it needs to be sturdy and not absorb moisture. And how we're defining stable in this article is that it won't shrink, check or crack....at all. Stabilized materials are generally water proof, shouldn't avoid gas, water, or oils.
Unfortunately that eliminates the fancy stuff that looks cool, like wood, bone, or ivory handles. But in the end you'll be grateful for not having your hand slip off a wet handle and slice your palm wide open. Avoid kraton at all costs, it's cheap and feels good but it won't last. Metal handles with checkering are best to get traction for wet situations, but it comes down to the quality of the manufacturer at the end of the day.
Our Top 3 Choices
In a hurry? Here's a snapshot of what's below:
Review of the Best EDC Folding Knife
Looking for a new everyday carry knife? No sweat - we've got you covered. Let's see what's in store:
Kershaw 1990 Brawler Speedsafe Folding Knife
We're going to start off the roundup with a knife that's within reach of most people, and has some of the top qualities. The Kershaw tanto blade is truly one of a kind, with a carbon content blade that has a black oxide coating it's a mildly tough composite so you'll need to keep an eye on the edge.
The glass filled nylon grip also meets the standards of what a great EDC knife needs to have in the way of gripability. The linear blade lock also means it's got a top notch lock, it's not going to stay locked forever, but the odds are better with the linear lock.
Most of the complaints about this knife are that the blade assist kicks the bucket pretty early, but for a knife that's less than $50 you can't expect too much. Other than that this is a great quality knife that will last you for quite a few years if you take care of it.
Al Mar Mini Sere 2000
The Al Mar SERE 2000 is a functional knife that's been around for quite a while, and was designed specifically for use in the Army’s Survival, Evasion, Resistance, and Escape program, which explains the name SERE. This knife has been a top pick for an EDC knife by working class heroes, including Army special forces. This, however, is not the knife that they use.
This is the Mini SERE 2000, a smaller version of the original that's meant to blend into your everyday carry routine. Does it compare to the military version? Absolutely it does! The 3-inch blade is of the VG-10 steel variety, which is both strong and easy to sharpen, and is a lot less likely to break at the tip.
The blade is deployable via a pair of thumb studs, while a scaled G10 handle on top of steel liners provides a sound grip. At 3.5 ounces, the Mini SERE 2000 is fairly lightweight, and nearly half the weight of its big brother.
This is the knife that brought back the American tanto blade from the dead in the 80’s, Cold Steel has worked their way into leading the manufacture of steel weapons. If you go into any public service such as police stations or military, the chances are good that one or two of them has a Cold Steel knife. They are tough enough for everyday carry and are built to last longer and stay sharper than quite a few of their competitors.
The Code 4 is newest addition to the family, and it was designed as a choice EDC knife for fire and police professionals. A 3.5 inch, Japanese Aus 8A stainless steel blade is available in your choice of a tanto point, a spear point, also a clip point depending on your desire, the slim 9mm thin aluminum handle keeps the knife’s weight below 4.3 ounces so it's not going to weigh you down after a long day of carrying it in your pocket.
Additional features are Cold Steel’s Tri-Ad locking mechanism and an ambidextrous stainless steel pocket clip.
At only 3.4 inches when closed, Gerber’s GDC Tech Skin Pocket Knife is on the smaller side of most EDC knives, but our goal is to get you the best quality knife while saving as much pocket space as possible, right? Just because it's a bit small for an EDC knife, doesn't mean it's not as good.
This is the knife you'll want if you want to keep things as minimal as possible, or if you only have a jacket pocket to squeeze a knife into.
A 2.5 inch, stainless steel drop point blade manages trivial tasks like cutting tasks such as opening letters and boxes with ease, while a rubberized handle helps you out by minimizing the scratches to your smartphone screen and other things you may be carrying in your pockets.
An neat feature is the thumb stud with a lock back safety, providing quick one-handed opening. The Gerber GDC Tech Skin Knife is good for everyday carry in your coat pocket.